Frequently Asked Questions

Our system will allow you to view your device(s) location(s) through three ways: via the internet, via your web-enabled mobile phone, or via our mobile app.

Our system is designed to locate a Trackimo Device anywhere in the world (with NO ADDITIONAL costs or roaming fees) as long as there is GSM cellular service area. If the device enters an area without GSM cellular coverage, the GPS feature will not be able to report its current location until it re-enters an area with network coverage. Once it reconnects, it will transmit a history of its locations that you can view online.

Yes – It will work anywhere that you have a GSM 2G cellular signal.

Global Positioning System (GPS) serves as a worldwide radio system and was originally developed and implemented by the U.S. Department of Defense. GPS is a satellite-based navigation system comprised of 24 orbiting satellites. GPS works on the principle that if you know an object’s distance from several known locations, you can then calculate its location. The “known” locations are the GPS satellites, and the distance to the object is measured using the transit time of an encoded signal. The satellites also broadcast a data stream along with the encoded signal to transmit information about their location.

The Trackimo device uses GPS (Global Positioning System) and cell ID technology to accurately track the device. It uses the wireless GSM network to transmit those positions to a web-based portal where users can view the device location.

The battery save mode, will place the device to sleep and wake up 2-4 time per day, report its location and go to sleep again to save the battery.

If you need this mode, let us know and we will turn it up for you.

If you need non-stop live tracking mode, than battery will hold for up to 4 days, depending on the tracking frequency (ie. once per min, or up to once per 2 hours)

Twelve months for manufacturer-related problems. This does not include abuse to the device or accidental damage or water damage.

You should not need to replace the unit unless it has been broken or damaged, or you wish to upgrade when a newer unit is available.

No. When you register your Trackimo device on our tracking application, you will be able to list up to ten trusted individuals that you want to receive notifications. You can also designate how you want them to receive the alerts; either via email (free service) or text alerts (paid service). You can change or edit these names at any time. If you want them to be able to directly track your device, they would need your log-in and password to access the web-based service or mobile App.

The initial location is the hardest as the Trackimo device is connecting for the first time with four satellites and figuring out where in the world it is. Most often this requires taking the device outside for 5 or more minutes. If activating in a home you may notice the initial location reported is approximate to your home but not very accurate. As your locator continues to gather data outside of the home and then inside, you will see its accuracy improve.

Your Trackimo device needs to have a clear view of the sky so that the satellite signals can be received. “Clear View of the sky” means that the device needs to have an open line of sight to the GPS satellites in the sky. GPS was developed for shipping, aircraft and launch vehicles, which have an unobstructed view of the sky.

GPS satellites are in constant motion, rising and setting. In a given 2 hour time window, four satellites may rise and set over the horizon. This means that a satellite fix that was obtainable fifteen minutes ago in a location may not be obtainable in the next try.

The best location to get a satellite fix is on an open road. Roads provide a clear line of sight in the direction of the road, and often the buildings and trees are set back sufficiently that there is good visibility side to side. This is the ideal device location in order to get the initial fix or location for your device.

No. The Trackimo device works best in suburban areas such as neighborhoods, houses, schools, parks, and flatter regions. It can receive a GPS signal better in these areas because there is less obstruction of the GPS signal. The better line-of-sight the GPS has to the satellites, the more accurate the position will be. The Trackimo device will work on a limited basis in cities where there are many high-rise buildings because the buildings decrease line of sight to the GPS signal causing errors in positioning.

No. The Trackimo device works best in suburban areas such as neighborhoods, houses, schools, parks, and flatter regions. It can receive a GPS signal better in these areas because there is less obstruction of the GPS signal. The better line-of-sight the GPS has to the satellites, the more accurate the position will be. The Trackimo device will work on a limited basis in cities where there are many high-rise buildings because the buildings decrease line of sight to the GPS signal causing errors in positioning.

Device Related Questions

Charge your Trackimo device using a standard universal USB AC adapter for a minimum of 12 hours. Then place your device in an area with a clear line of sight to the sky and power up your device by holding down the red button on the front side for 3-4 seconds. You will see a green LED flashing for 3 seconds to indicate the device powering on.

There will be a red LED blinking on the front face of the device.

The device takes a while to get its initial charge, just keep the device plugged in for a couple of hours or overnight.

1. After you have fully charged and turned on your device for the first time:

2. Browse to our website and click Login button.

3. If you are not registered yet, click on Sign Up, enter your e-mail and password, retype password and click on Sign Up For Trackimo and after a while please check your e-mail and confirm registration then go to and click Login button.

4. Login using your e-mail and password.

5. Click Orange “Activate device” button or choose Activate device from drop-down menu at top-right and follow the form.

6. You will need to enter your device ID; It can be found on the label attached to the bottom of the Box or underneath battery. It is a 7 digit number (e.g., 1050137).

7. You will be able to enter your payment details or activation code.

8. Follow activation prompts from the website.

Yes. You can activate a Trackimo Device for someone else using his Trackimo account credentials. However, if you are registering a new device under a new Trackimo account, you must have access to the email account used to click the confirmation link.

The SOS button needs to be pressed and held for 4 seconds to activate an alert. This helps prevent false SOS alerts.

1. To power the device ON

Press and hold the Power Button until the locator status LED indicator begins to glow. This will take approximately 2 seconds. A blinking green LED will then indicate that the device is operating correctly.

2. To power the device OFF

Press and hold the Power Button until the locator status LED Indicator begins to flash quickly. This will take approximately 2 seconds. The locator status LED indicator will shut off when the device has properly shut down.

Your Trackimo Device will beep for different reasons. This includes when the device powers on, powers off, and connects to a GPS or GSM network. For a detailed explanation of the beeps, please refer to the user guide.

The Trackimo device is water resistant when covered with the supplied silicone water resistant cover, but is NOT waterproof.

No. Like a cell phone, the device cannot send or receive communications when turned off.

Smartphones are designed for spoken communication with limited location ability available as a convenience. The Trackimo device’s primary purpose is to monitor its position accurately and reliably and to provide pre-selected alerts.

Under normal use, the battery can last up to 48 hours. Please note that several factors can affect the battery life including temperature, network, signal strength and locator features used. For example, if the device is in a very limited cell (GSM) coverage area, this will require the device to work harder to obtain a signal resulting in less battery life. Also, the more frequently you track the device, the faster the battery will be used.

The battery status of your Trackimo device can be viewed on the web portal and mobile App.

When you get a “Low Battery” email or text message alert, you should immediately charge your device. The alert is designed to let you know that your device is running out of power and needs to be recharged.

Currently, these alerts can come via email only.

Use macro for network test/check. Pass through if device still does not work

Application Related Questions

The following browsers are supported:
Microsoft Internet Explorer 10+
Google Chrome version 31.0+
Apple Safari 5.1.7+
Mozilla Firefox 18.0.2+
Opera 17.0+

Go to Click the login button on the top center and enter your E-mail and Password details.

There is a Trackimo Mobile App for the Apple Iphone and Google Android.

In the upper right section of the header near your email login click the drop down arrow, select “Change password” and fill in your new selected Password.

Contact the customer support number at 646-626-6111 and ask for assistance in changing the email address for you.

For clients outside the U.S. and Canada area, submit a support ticket with a request to change the email address. Additional information for verification purposes may be required.

Support can cancel the auto renewal for your device. Submit a support ticket to request the said cancellation.This way, you can control when to renew your subscription, and which plan you want to use in the future.

For, now you don’t have the capability to delete the history on each unit. However, you can call or submit a ticket to customer support, so that they can do this for you.

A GeoFence is a defined boundary that allows alerts to be triggered when a GPS device passed in our out of that area. Within the application, GeoFences can be created that are circular, polygonal, or the path of a route.

Click on the device name you wish to add a Geofence for, then click the “Fences” tab.

Click the “Create new Fence” button.

A rectangle pink fence will appear surrounding your device (or at the center of the map). You can enter a specific address to centralize your fence around it. You can select a pre-defined perimeter size. You can modify the fence size and location by dragging its borders and moving it on the map. When you’re satisfied with your new fence, give it a name and click “Done”. Once the GeoFence is created, you can add additional emails and phone numbers (by SMS) that will receive alerts for this fence.

No. After activating the Trackimo device, it will begin to send GPS information to the Trackimo site and you will be able to view its location. If you want to receive automated alerts, you will need to set up your own GeoFence and Alarm settings.

The smallest size for a GeoFence zone is 200 meters (656 feet). This helps prevent false alerts.

Yes. You have the ability to create up to 5 zones. You will be alerted when your device enters or exits these zones.

You won’t receive your alerts until your mobile phone is turned on and connected to the network. Fortunately, we have several modes to deliver important messages to you and alternate recipients: SMS, email, and phone calls.

If the GPS positioning accuracy is good then the speed is usually accurate. However, in no event shall Trackimo be liable for indirect or consequential damages including, without limitation, damages for any traffic fines or citations resulting from use of the product.

If you’re in the middle of a subscription during change, you can ask customer support to cancel the subscription and change the information upon renewal.

If you’re no longer on auto-renewal, you can change your payment information once your subscription expires.

No, you will not be able to continue viewing your tracking data history.

Please check app settings, turn on notifications, update contacts. If you’re still having trouble after, please submit a ticket to support.


This could be a compatibility issue with the web browser version that you are using to view We have optimized our Trackimo application to display best on the most widely used and updated web browsers.

First place the device somewhere with a clear line of sight to the sky. Make sure the Trackimo device is powered on. Remember that your device reports its location in intervals, at whatever time frequency you chosen in the settings. The device needs to be outside with a clear line of sight to the sky during those intervals for the location to be updated and reported.

Please note: The first time the device is turned on, it can take up to 30 minutes for its global position to be calculated. Once operational, the sequence of fixing on the satellite signals will be much shorter.

If you can’t get the Trackimo device to turn on, please make sure that you have charged the battery for at least 12 hours for first time use. If the device has been charged, press and hold the Power button until the LED begins to glow. This will take approximately 2 seconds. The LED status indicator will change to blinking green when the device is ready to be used.

GPS devices often “drift” when reporting their location and this can depend on the surrounding environment. Every time the device sends a new location it has to receive information from the GPS Satellites and this calculation can differ slightly. The surroundings, such as buildings, trees and the atmosphere, can affect the accuracy of the location that the device reports.

If you recharged your Trackimo device after its battery died then you will need to power it back on as the device powered off when the battery died.

Because there is a monthly limit to SMS messages according to your billing plan.

If you are unable to find a solution to a problem here, please Submit a request so we can investigate the issue.

Quick Links

Your Privacy

Return Policy

Submit Support Ticket

Product User Guide & User Manual

2G Universal Tracker
User Manual

3G Universal Tracker
User Guide

3G Guardian Tracker
User Guide

3G Watch Tracker
User Guide

Mini Tracker
User Guide

Trackimo Lights

Trackimo Safety

Product Brochure

Car Charger
User Guide

3G GPS Travel Tracker
User Guide

Product Data Sheets

2G Universal Tracker
User Manual

3G Universal Tracker

3G Guardian Tracker

3G Watch Tracker

2G Mini Tracker

3G Travel Tracker

Trackimo Setup and Activation Instructions

Trackimo – Product Demo

Please submit a Support Ticket and we’ll get back to you as soon as possible.
Our working hours is from Monday to Friday, 10am – 7pm EST

We are always happy to support our customers.